The Value of Quality Trim
Interior trim — baseboards, door casings, window trim, and crown moulding — defines the architectural quality of a room. Cleanly painted trim elevates any space; sloppy trim undermines even high-quality wall work.
Semi-gloss is the standard trim sheen. It creates a subtle contrast with flat or eggshell walls, is easier to clean, and its slight reflectivity emphasizes trim profiles in the way that flat paint does not.
Material and Style Options
Surface preparation for trim is as important as for walls. Fill nail holes with lightweight spackling, sand bumps and rough areas, and re-prime bare or repaired areas before applying finish coat.
Brush selection matters significantly for trim. A high-quality 5cm (2-inch) angled sash brush holds enough paint to cover trim in fewer strokes and gives sufficient control to cut clean edges at wall intersections.
Professional Installation
Apply trim paint in long, smooth strokes following the grain direction of the wood profile. Avoid over-brushing — excessive back-and-forth creates brush marks in the drying film. Apply smoothly and leave it alone.
Cut in at the wall carefully, using the brush edge to create a clean line. Many experienced painters do not tape trim but rely on a steady hand with an angled brush. If you do tape, use quality low-tack blue tape applied before the trim coat.
Allow full cure time before removing tape and before doors or windows close against painted trim. Fresh paint tears on tape removal and sticks to adjacent surfaces. Check paint manufacturer recommendations for recoat and cure time.