Bathroom Renovation Essentials
Bathroom exhaust ventilation is one of the most overlooked but critically important systems in any Ontario home. Inadequate ventilation leads to elevated humidity, condensation on surfaces, and eventually mould growth in walls and ceilings — costly damage that a properly specified fan prevents.
Fan sizing is determined by the bathroom's volume. The standard rule is 1 CFM (cubic feet per minute) per square foot of floor area, with a minimum of 50 CFM for any bathroom. For bathrooms with a separate shower, whirlpool tub, or ceilings over 8 feet, upgrading to a larger unit is appropriate.
Design Choices That Matter
Sone rating measures fan noise. Standard builder fans are often 3–4 sones — noticeable and distracting. Upgrading to a 0.3–1.0 sone unit creates a dramatically quieter bathroom environment. Quiet fans are also more likely to be used consistently, which is the point — a fan no one uses doesn't help.
Combination units — exhaust fan with integrated LED lighting, humidity sensor, heater, or motion sensor — are increasingly popular in Ontario bathroom renovations. A humidity-sensing fan automatically runs until the bathroom reaches a set humidity level, removing moisture even if the occupant forgets to run it.
Hiring the Right Contractor
Venting path matters as much as the fan itself. The duct must terminate to the exterior — never into an attic or wall cavity. In Ontario's climate, an insulated duct prevents condensation within the pipe. A proper exterior damper prevents cold air backdraft in winter.
D&D Interior Services installs and upgrades bathroom exhaust fans as part of bathroom renovations or as standalone mechanical upgrades. We ensure proper sizing, appropriate duct configuration, and correct exterior termination to protect your home from moisture damage.